DANSK DS/EN ISO 10485:2004 螺母錐形保證載荷試驗

SAME AS ISO 10485

Cone proof load test on nuts

BS EN ISO 10485:2004 螺母錐形保證載荷試驗

Specifies under the conditions of the load test the properties of nuts with: nominal thread diameter from 5 mm up to 39 mm; product grades A and B

Cone proof load test on nuts

GOST R ISO 10485-2010 螺母錐形保證載荷試驗

Cone proof load test on nuts

IS 15568-2005 螺母錐形保證載荷試驗

Cone proof load test on nuts

ISO 10485:1991 螺母錐形保證載荷試驗

Specifies under the conditions of the load test the properties of nuts with: nominal thread diameter from 5 mm up to 39 mm; product grades A and B

Cone proof load test on nuts

NF E25-400-8:2004 螺母的錐形保證載荷試驗

Cone proof load test on nuts.

DIN EN ISO 10485:2004 螺母的錐形保證載荷試驗

This standard specifies the properties of steel nuts under the conditions of the cone proof load test

Cone proof load test on nuts (ISO 10485:1991); German version EN ISO 10485:2004

DIN EN ISO 10485 E:2013-09 螺母的錐形保證載荷試驗（草案）

Conical proof load test of nuts (draft)

GB/T 3098.12-1996 緊固件機械性能 螺母錐形保證載荷試驗

本標準規定了螺母在錐形保證載荷試驗條件下的性能。 本標準適用于螺紋直徑為5～39mm、產品等級為A和B級以及性能等級為8～12級的螺母，并要求進行錐形保證載荷試驗的情況

Mechanical properties of fasteners--Cone proof load test on nuts

EN ISO 10485:2004 螺母的錐形保證載荷試驗 ISO 10485-1991;代替EN 493-1992

Cone proof load test on nuts (ISO 10485:1991)

BS EN 20898-2:1992 緊固件的機械性能 具有規定保證載荷值的螺母

Bolts, screws and studs with nominal diameters up to and including 39 mm of any triangular ISO thread and made of carbon steel or alloy steel

Mechanical properties of fasteners-Nuts with specified proof load values

BS 6104-2:1983 緊固件機械性能 具有規定保證載荷值的螺母規范

Specifies the mechancial properties of nuts within the temperature range +300°C to -50°C with nominal diameters up to and including 39 mm

Mechanical properties of fasteners-Specification for nuts with specified proof load values

AS/NZS 4291.2:1995 緊固件的機械性能．有規定保證載荷值的螺母．粗牙螺紋

Specifies materials, mechanical properties and marking requirements for steel nuts of property classes 4, 5, 6, 8, 9, 10 and 12 with ISO metric coarse

Mechanical properties of fasteners - Nuts with specified proof load values - Coarse thread

BS EN 20898-6:1992 緊固件的機械性能 具有規定保證載荷值的螺母 細牙螺紋

Specifies mechanical properties within temperature range +30°C to -50°C with nominal diameters from 8 mm to 39 mm inclusive of triangular ISO thread

Mechanical properties of fasteners-Nuts with specified proof load values. Fine pitch thread

BS EN 20898-2:1994 緊固件的機械性能 具有規定保證載荷值的螺母 粗牙螺紋

Cross References: BS 891 BS 3643:Part 1 BS 3692 BS 4190 BS 4935:Part 1 BS 4935:Part 2 BS 4500:Section 1.2 ISO 1 ISO 965-2 ISO 4964 ISO

Mechanical properties of fasteners-Nuts with specified proof load values. Coarse thread